Modeling and numerical investigation of hydrogen nucleate flow boiling heat transfer

Liquid hydrogen flow boiling heat transfer in tubes is of great importance in the hydrogen applications such as superconductor cooling, hydrogen fueling. In the present study, a numerical model for hydrogen nucleate flow boiling based on the wall partition heat flux model is established. The key parameters in the model such as active nucleation site density, bubble departure diameter and frequency are carefully discussed and determined to facilitate the modeling and simulation of hydrogen flow boiling. Simulation results of the numerical model show reasonably well agreement with experimental data from different research groups in a wide operation condition range with the means absolute error (MAE) of 10.6% for saturated and 5.3% for subcooled flow boiling. Based on the model, wall heat flux components and void fraction distribution of hydrogen flow boiling are studied. Effects of mass flow rate and wall heat flux on the flow boiling heat transfer performance are investigated. It is found that in the hydrogen nucleate flow boiling, the predominated factor is the Boiling number, rather than the vapor quality. A new simple correlation is proposed for predicting hydrogen saturated nucleate flow boiling Nusselt number. The MAE between the correlation predicted and experimentally measured Nusselt number is 13.6% for circular tubes and 12.5% for rectangular tubes. The new correlation is applicable in the range of channel diameter 4–6.35 mm, Reynolds number 64000–660,000, saturation temperature 22–29 K, Boiling number 8.37 × 10^?5–2.33 × 10^?3.     

东营2×1000 MW电厂总平面优化设计

针对大型机组电厂总平面设计存在的优化空间,提出了总平面布置与工艺方案之间的融合设计理念.结合东营电厂工程实际,通过采用主厂房区平面与立体空间综合布局、500 kV室外气体绝缘金属封闭组合电器(gas insulated metal-enclosed switchgear,GIS)进、出线构架合并、翻车机入厂端布置、水务设施恰当整合的优化设计方案,不仅有效减少了厂区用地面积,降低基建投资,缩短建设周期,同时节约了电厂运营成本,为提高生产效率、方便维护管理创造了有利条件,为大型机组电厂总平面设计提供了优化思路.     

Neural network-based prediction of the long-term time-dependent mechanical behavior of laminated composite plates with arbitrary hygrothermal effects

Journal of Mechanical Science and Technology - Recurrent neural network (RNN)-based accelerated prediction was achieved for the long-term time-dependent behavior of viscoelastic composite laminated...     

Luminescent and magnetic properties of cerium-doped yttrium aluminum garnet and yttrium iron garnet composites

Functional materials exhibiting magnetic and luminescent properties have been recognized as an emerging class of materials with great potential in advanced applications. Herein, properties of multifunctional ceramic composites consisting of two garnets, luminescent cerium-doped Y₃Al₅O₁₂ (Ce:YAG) and magnetic Y₃Fe₅O₁₂ (YIG), are reported. On increasing the sintering temperature, both the photoluminescence and saturation magnetization of the Ce:YAG-YIG composites decreased gradually because of the interdiffusion of trivalent ions such as Al³⁺ and Fe³⁺. At a constant sintering temperature of 1100?°C, the YIG contents in the composites increased, thereby causing their luminescent properties to degrade and the saturation magnetizations to increase. For application to electronics, Ce:YAG-YIG composite thin films were integrated on quartz substrates by sputtering the ceramic target. The composite thin films exhibited both magnetic and luminescent properties after annealing. These techniques facilitate the incorporation of multifunctional nanocomposites into various devices.     

Tuning effect of silicon substitution on magnetic and high frequency electromagnetic properties of R2Fe17 and their composites

In this work, we report the tuning effect of the Si substitution on the magnetic and high frequency electromagnetic properties of R₂Fe₁₇ compounds and their paraffin composites. It is found that the introduction of Si can remarkably improve the magnetic and electromagnetic properties of the R₂Fe₁₇ compounds, making the R₂Fe_17–xSi_x-paraffin composites excellent microwave absorption materials (MAMs). By introducing the Si element, their saturation magnetizations decrease slightly, while much higher Curie temperatures are obtained. Furthermore, better impedance match is reached due to the decrease of the high-frequency permittivity ε′ by about 40%–50%, which finally enhances the performance of the microwave absorption. The peak frequency (f_RL) of the reflection loss (RL) curve moves toward high frequency domain and the qualified bandwidth (QB, RL ≤ ?10 dB) increases remarkably. The maximum QB of 3.3 GHz (12.0–15.3 GHz) is obtained for the Sm_1.5Y_0.5Fe₁₅Si₂-paraffin composite (d = 1.0 mm) and the maximum RL of ?53.6 dB is achieved for Nd₂Fe₁₅Si₂-paraffin composite (d = 2.2 mm), both surpassing most of the reported MAMs. Additionally, a distinguished dielectric microwave absorption peak is observed, which further increases the QB in these composites.     

The latent learning model to derive semantic relations of words from unstructured text data in social media

Multimedia Tools and Applications - Unstructured text data is very important in many applications because it reflects the thought of the people who create this data. However, it is difficult to...     

Alkali metal ion substitution induced luminescence enhancement of NaLaMgWO6:Eu3+ red phosphor for white light-emitting diodes

Alkali metal ion substitution is an effective strategy to improve the luminescence properties of phosphors. In this work, a series of red-emitting phosphors Na_1-xLi_x/2K_x/2La_0.6Eu_0.4MgWO₆ were prepared by a traditional high-temperature solid-state reaction. Their phase structure, microstructure, luminescence properties and potential application in phosphor-converted white light-emitting diodes (pc-WLEDs) were investigated in detail. X-ray diffraction (XRD) result revealed the formation of a solid solution when x?≤?0.3, which kept monoclinic structure of NaLaMgWO₆. Photoluminescence investigation indicated that the partial substitution of Li⁺/K⁺ ions for Na⁺ ions improved largely the red emission of Eu³⁺. Based on the optimized Na_0.7Li_0.15K_0.15La_0.6Eu_0.4MgWO₆ sample with relatively good thermal stability, a WLED device was fabricated by combining a near-ultraviolet (NUV) chip (~400?nm) with the phosphor mixture of commercial green/blue phosphors and the optimized red phosphor. The results indicated that the optimized red phosphor in this work could be a potential candidate for WLEDs pumped by NUV chips.